Products > Steam Traps > Float & Thermostatic Steam Traps

MODEL	TYPICAL APPLICATIONS	SPECIFICATIONS
FT	DRIP, PROCESS: The FT Series Float & Thermostatic Steam Traps are used for HVAC and light industrial process applications, and can be applied to unit heaters, water heaters, pressing machines, heat exchangers, and coils. These traps have excellent air removal capability making them an excellent choice for HVAC and process applications requiring quick start-up. CATALOG SPEC SHEET(S)	Model: FT Body Material: Cast Iron Max Capacity: 18,100 lbs/hr Max Operating Pressure: 75 PSIG Sizes: 3/4" - 2" Connections: NPT
FT600 & FT601	PROCESS The FT600 & FT601 Series High Pressure Float & Thermostatic Steam Traps are primarily used on industrial process applications. The excellent air handling capabilities of float and thermostatic traps make them a better choice than bucket traps for applications requiring quick system start-up. These traps have in-line pipe connections. Used in chemical plants and petrochemical refineries on reboilers, heat exchangers, and other critical process applications. Model FT601 is identical to FT600 except body material is 316 SS. CATALOG SPEC SHEET(S)	Model: FT600 & FT601 Body Material: Carbon Steel / 316 Stainless Steel Max Capacity: 61,250 lbs/hr Max Operating Pressure: 450 PSIG Sizes: 3/4" - 4" Connections: NPT, SW, FLG
FTE & FTES	PROCESS: The FTE & FTES Series Float & Thermostatic Steam Traps are used in HVAC and on industrial process equipment with very high load requirements. These high capacity steam traps are typically used on reboilers, absorption chillers, large air handling coils, large heat exchangers, and other large process equipment. CATALOG SPEC SHEET(S)	Model: FTE & FTES Body Material: Ductile Iron / Cast Steel Max Capacity: 105,000 lbs/hr Max Operating Pressure: 200/300 PSIG Sizes (FTE): 1-1/2" - 2-1/2" Sizes (FTES): 2-1/2" Connections (FTE): NPT Connections (FTES): NPT, SW, FLG
FTT	DRIP, PROCESS: The FTT Series Float & Thermostatic Steam Traps are used in drip and process applications, industrial and HVAC process equipment. The excellent air handling capabilities of float and thermostatic traps make them a better choice than bucket traps for applications requiring quick system start-up. These traps have in-line pipe connections. Used on unit heaters, textile machines, heat exchangers, and other medium sized process equipment. CATALOG SPEC SHEET(S)	Model: FTT Body Material: Ductile Iron Max Capacity: 61,300 lbs/hr Max Operating Pressure: 300 PSIG Sizes : 1/2" - 2" Connections: NPT
WFT	PROCESS: The WFT Series Float & Thermostatic Steam Traps are used for HVAC and industrial process applications. The excellent air handling capabilities of these traps make them a better choice than bucket traps for applications requiring quick start-up. Used on unit heaters, textile machines, heat exchangers, and other process equipment. CATALOG SPEC SHEET(S)	Model: WFT Body Material: Cast Iron Max Capacity: 11,020 lbs/hr Max Operating Pressure: 250 PSIG Sizes : 3/4" - 2" Connections: NPT

Products > Steam Traps > Float & Thermostatic Steam Traps