Products > Condensate Return Pumps > Pump-Trap Combinations

MODEL	TYPICAL APPLICATIONS	SPECIFICATIONS
PMPT	The Model PMPT Low-Profile Pressure Motive Pump has an internal Steam Trap for applications requiring compact design due to spatial constraints. It is an excellent choice for drainage of various modulating process equipment. The PMPT allows condensate discharge under all operating conditions of modulating equipment, including vacuum. CATALOG SPEC SHEET(S)	Model:   PMPT Pump Body Material:  Ductile Iron Trap Configuration: Internal Check Valves: Stainless Steel Max Capacity, Simplex, 6" Head, Steam Motive: 2,280 lbs/hr Max Operating Pressure:  125 PSIG Sizes : 1" x 1", 1-1/2" x 1-1/2" Connections: NPT
WPT1	The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap. CATALOG SPEC SHEET(S)	Model:   WPT1 Pump Body Material:  Carbon Steel Trap Configuration: External Trap Body Material: Ductile Iron Check Valves: Stainless Steel Max Capacity, Simplex, 6" Head, Steam Motive: 1,720 lbs/hr Max Operating Pressure:  150 PSIG Sizes : 1" x 1" Connections: NPT
WPT2	The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap. CATALOG SPEC SHEET(S)	Model:   WPT2 Pump Body Material:  304L Stainless Steel Trap Configuration: External Trap Body Material: Ductile Iron Check Valves: Stainless Steel Max Capacity, Simplex, 6" Head, Steam Motive: 2,840 lbs/hr Max Operating Pressure:  150 PSIG Sizes : 1-1/4" x 1-1/4" Connections: NPT
WPT3	The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap. CATALOG SPEC SHEET(S)	Model:   WPT3 Pump Body Material:  Cast Iron Trap Configuration: External Trap Body Material: Ductile Iron Check Valves: Stainless Steel Max Capacity, Simplex, 12" Head, Steam Motive: 5,230 lbs/hr Max Operating Pressure:  150 PSIG Sizes : 1-1/2" x 1-1/2" Connections: NPT
WPT4	The Watson McDaniel WPT Series Pump-Trap Combinationis excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap. CATALOG SPEC SHEET(S)	Model:   WPT4 Pump Body Material:  Carbon Steel Trap Configuration: External Trap Body Material: Ductile Iron Check Valves: Stainless Steel Max Capacity, Simplex, 12" Head, Steam Motive: 8,590 lbs/hr Max Operating Pressure: 150 PSIG Sizes : 2" x 2" Connections: NPT
WPT5	The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap. CATALOG SPEC SHEET(S)	Model:   WPT5 Pump Body Material:  Carbon Steel Trap Configuration: External Trap Body Material: Ductile Iron Check Valves: Stainless Steel & Steel Max Capacity, Simplex, 12" Head, Steam Motive: 13,300 lbs/hr Max Operating Pressure:  150 PSIG Sizes : 3" x 2" Connections: NPT

 

Products > Condensate Return Pumps > Pump-Trap Combinations