W4100
 |
The primary purpose of the W4100 Electric Condensate Pump is to return
condensate back to the boiler. Pumping condensate over 190ºF is not
recommended with these pumps due to potential mechanical seal
failure. The W4100 comes with a Carbon Steel
Receiver.
Notes:
1.
Optional higher pressure ratings and high temperature components are
available; contact factory.
2. Available in Simplex & Duplex packages.
 CATALOG SPEC
SHEET(S)
|
Model: W4100
Tank Material: Carbon Steel
Tank Sizes: 8, 15,
30, 45, 60, 95 Gallons
Max Discharge Pressure: 50 PSIG
Max Capacity (Condensate): 75
GPM
Sizes (Tank Side Inlet x Pump Outlet):
G Series: 2" x 3/4",
2-1/2" x 3/4"
J
Series: 2-1/2" x 1-1/2"
Connections: NPT
|
W4200
|
The primary purpose of the W4200 Electric Condensate Pump is to return
condensate back to the boiler. Pumping condensate over 190ºF is not
recommended with these pumps due to potential mechanical seal
failure. The W4200 comes with a Cast Iron
Receiver.
Notes:
1.
Optional higher pressure ratings and high temperature components are
available; contact factory.
2. Available in Simplex & Duplex packages.
CATALOG SPEC
SHEET(S) |
Model: W4200
Tank Material: Cast Iron
Tank Sizes: 6, 15, 24,
36, 50 Gallons
Max Discharge Pressure: 50
PSIG
Max Capacity (Condensate): 75
GPM
Sizes (Tank Side Inlet x Pump Outlet):
G Series: 2" x 3/4", 3" x
3/4"
J Series: 3" x
1-1/2"
Connections: NPT
|
Product Catalog -
Condensate Return Pumps